Pages

Tuesday, October 25, 2011

Isaac Clarke's Engineering RIG Costume

A while back I posted about building the helmet for Isaac Clarke's engineering RIG from Dead Space 2



Wearing the helmet and nothing else looks wrong.  Plus, it tends to disturb the other patrons in the coffee shop I frequent.  This means I absolutely had to build the rest of the RIG.


Here's the end result:

For details on how I made it (and a few better pictures), read on.



I started with the neck piece:
Isaac neck widget


It was made from a piece of acrylic tube, a piece of a plywood cylinder, some PVC pipe, and oodles of scraps of sheet styrene in various thicknesses.


For a while I was even doing a half-decent job of keeping a neat(ish) workspace for this build:
Dead Space costume workspace


After the neck piece was done, I made the little riblet details for the chest.  They're essentially just six unique pieces repeated six times, so I only had to make one set of prototypes:
Isaac ribcage bits painted


Then I sculpted the large back piece in clay with a few found items thrown in:
Isaac Clarke Back Blocking Complete


Here's the finished sculpt:
Isaac Clarke Back Detailed angle


Here's the rubber jacket mold and fiberglass mothermold:
Isaac Clarke Back Molds


And here's the first casting out of the mold.  I made the little greeblie details separate castings:
Isaac Clarke First Back Casting assembled


For the health tube, I cooked up a sheet of blue-tinted acrylic and bent it to fit.  Here's an early lighting test using EL wire:
Isaac Clarke Lighting Test


Here you can see the nasty mess on the inside:
Isaac Clarke Lighting behind the scenes


Having made a mold for the neck piece and the little riblets, I cast copies of them as well and started laying them out as they would appear on the costume:
Isaac Clarke Chest Parts


The right arm also has a series of repeating parts.  After careful study, I decided I could make all twelve of the bronze colored parts out of only four unique pieces:
Isaac Clarke Arm Begins


The problem is that the shoulder and chest parts all have a curve to them.  Molding pieces with such a curve is a massive pain in the buttocks, so I decided to cheat a little bit and make them flat. 


Curved Castings Step 1


When the resin had kicked just enough to pull it out of the mold without falling apart, I pulled the pieces and bent them to the curve I needed:
Curved Castings Step 2


Since I don't enough time (or hands) to stand around holding all of these things in the curve that I want, the next step is to lay them inside a piece of plywood cylinder I had laying around:
Curved Castings Step 3


Then I clamp them in place and wait for the resin to finish curing:
Curved Castings Step 4


The left arm would only need the shoulder bit and the bicep band.  I made these out of MDF on the bandsaw:
Isaac Clarke Left Arm Parts


There are also rings around the thighs just above the knees, so I cut one of them from MDF as well.  Here's the bicep and thigh rings as well as the left shoulder bit all painted up and ready for molding:
Isaac Clarke bicep and thigh rings


The gauntlets made for an interesting build with their overwhelming volume of details.  I cobbled them together from scrap sheets of ABS and styrene I had leftover from other projects.  Here's the inside of the left:
Isaac Clarke Left Forearm


Here's the outside:
Isaac Clarke Left Forearm details


Once I was happy with the build, I gave it a coat of primer to make sure it still looked good when it was all one color:
Isaac Clarke Left Forearm primed


Then I capped the end and prepped it for molding:
Isaac Clarke Left gauntlet Primed


The right forearm was done the same way.  Here's a shot of it prepped for molding:
Isaac Clarke Right gauntlet Primed


The molds for the gauntlets were simple matrix molds.  Here's the one for the right gauntlet:
Right Gauntlet Mold Poured


After rotocasting one of each, it was time to start prepping them for paint:
Isaac Clarke Righ Gaunt Cutting


Of course, with the ends cut open I couldn't resist the urge to try them on:
Isaac Clarke Arm Castings


Somewhere toward the end of this build, my workshop camera walked off and I didn't get pictures of the prototypes for a few parts. In that time I sculpted, molded and cast the left hand parts:
Isaac Clarke Left Hand


The tailbone:
Isaac Clarke Tailbone parts


The straps and greeblies for the right thigh too:
Isaac Clarke Leg Parts


About this same time I also put together a belt buckle from MDF and bits of styrene:
Isaac Clarke Belt Buckle Prototype


That done, I started working on the boots.  It turns out that the hard parts of the boots are nearly identical from left to right.  So I decided to cheat a bit and only make one set of prototypes.  Here's an early shot of the shin/calf part which I'd thrown together from bits of sheet stock:
Isaac Clarke Shin


Here's the toe:
Isaac Clarke Boot Toe Begin


Here's all three of the pieces of the boot before the went under the rubber:
Isaac Clarke Boot Parts


Boot molds in progress on my increasingly messy workbench:
Isaac Clarke Boot Molds


Here's the boots all stacked together before painting:
Isaac Clarke Boots


Under the bronze-looking parts on the chest there are an array of straps that seem to hold them all together. To simulate this, I made a bunch of strips of 1/4" fiberboard:
Isaac Clarke Torso Strap Forms


Then I laid them out on the forming table and made a pull in .040" ABS plastic:
Isaac Clarke Torso Strap Pull


After cutting them out on the bandsaw, they really looked the part:
Isaac Clarke Back Strips


Back in the workshop, I put a coat of black primer on all of the parts:
Isaac Clarke Parts Primed


There's a lot of parts. Once the primer had dried, I gave it all a bronze basecoat:
Isaac Clarke Parts Bronze


Just like the helmet, various parts were picked out in different shades of Model Masters Metalizers:
Isaac Clarke Parts Detail Painting


I also picked out a lot of parts in gloss black:
Isaac Clarke Airbrushing


After the airbrushing was done, it was time for a blackwash to age it all:
Isaac Clarke Parts Blackwash




Once I'd decided on how to attach the rig parts to the chest, it was time to head over to Barta Hide in Petaluma and pick up some leather scraps and remnants.  Barta has the best deals I've ever found for leather, provided you can cope with the smells while you dig through their scrap bins:



I made a quick pattern out of butcher paper and convinced my friend Breana to throw together a leather vest for me. Here's the parts cut out:
Isaac Clarke Vest Parts


Once the vest was stitched together, it was time to lay out the hard parts:
Isaac Clarke Back Parts Test Fitting


While I was tinkering with the vest, it was time to finalize the wiring. I gave my friend Matt a rough idea of how I envisioned it and handed him a couple of printed screen captures from the game and he came up with this:
Isaac Clarke Back Part Inside


It works:
Isaac Clarke Back Part Installed




To assemble the vest, I used rivets through the leather to attach all of the straps and chunks of armor. Here's a shot of the inside:
Isaac Clarke Vest Inside


Here I am trying it on:
Isaac Clarke Vest Front




Here's the vest all put together:


I also had Breana add a leather seat to a pair of grey short-sleeved Dickies coveralls and riveted a few pieces of the armor onto them.  Here's an early test fitting:
Isaac Clarke Test Fitting




The test fitting was done using Trevor the walking mannequin. He's a good sport and usually manages to hold still while I poke holes in his clothing with a soldering iron and then drive in pop rivets:
Isaac Clarke Assembling 3


Here's another shot of the RIG coming together:
Isaac Clarke Dressing


Using black and red rattlecan primer, I added some stains and weathering to the coveralls:
Isaac Clarke Assembling 2


Some days I feel sorry for Trevor, but then I figure it's his own fault for being about my size and willing to suffer. Either way, he seems to be okay with being dressed up and abused if only because it means he gets to stand around looking like this:
Isaac Clarke Arms Crossed


Final assembly of the RIG required 176 pop rivets, 14 wood screws, 4 zip ties, and (somehow) absolutely no bleeding.  Here's some dimly-lit shots of the end result:
Isaac Clarke Dark Picture 1


Isaac Clarke Dark Picture

I still need to take this costume out for a location photoshoot armed with something other than a DeWalt cordless drill and throw together a more convincing Necromorph than my friend Matt:
Isaac Clarke 3rd Person Shooter View

But you get the idea.

I've got an even bigger costume project in the works right now.  As always, stay tuned...

77 comments:

  1. How did you get visibility in the helmet?

    ReplyDelete
  2. SHUT UP AND TAKE MY MONEY

    ReplyDelete
  3. Awesome stuff man. I've always tried to make interesting costumes for Halloween, but never anything as impressive as this stuff. Plus, it's always cool hearing about this stuff in places I live near (In RP). I should clean out the garage and start building a little workshop to do some cooler stuff, or at least mess around.

    ReplyDelete
  4. this is absolutely amazing! Well done!

    ReplyDelete
  5. As a novice costume maker, this is inspiring. Amazing work.

    ReplyDelete
  6. Excellent work you have done there. I wonder if you can see through that helmet

    ReplyDelete
  7. http://www.thinkgeek.com/geektoys/collectibles/e9dd/

    There. What is quite possibly the most amazing costume piece I've ever seen deserves an equally amazing prop.
    Wish I had access to tools like that... I'd go a little nuts.

    ReplyDelete
  8. If only I had the patience and skill you have. Damn fine job dude

    ReplyDelete
  9. Just...awesome...

    ReplyDelete
  10. Matt is a shockingly good necromorph

    ReplyDelete
  11. That's awesome. Any chance of a security suit?

    ReplyDelete
  12. Anon made a very good question.
    I'm interested in this.

    ReplyDelete
  13. How much? I just threw my wallet at the screen.

    ReplyDelete
  14. shits the dank bro

    ReplyDelete
  15. Your a cool guy. At least I assume you are because you just built a bad ass costume. Props to you for your hard work and ingenuity.

    ReplyDelete
  16. Small X-Ray machine mounted on the helmet that then feeds the acquired data to an android based phone that is then connected to a mini LCD screen inside the helmet in front of the eye viewing area. It wasn't the greatest choice but all of the other options were classified military items that I wasn't allowed to take home. Area 51 doesn't joke around anymore.

    ReplyDelete
  17. That isn't my real name. ...Damn it... Michelle is going to be pissed

    ReplyDelete
  18. I mean.. no one is going to be pissed.. Please don't approve my comments. I am the president of the USA and this is going to fuck up my re election.

    ReplyDelete
  19. Obviously he just bought this costume off the internet. jeesh.

    ReplyDelete
    Replies
    1. Your a big fat pice of shit if you thank that

      Delete
    2. Easy, killer. I'm pretty sure he was being facetious.

      Delete
  20. i would pay any amount of money for something like this dude, this is amazing work beyond any words can describe

    ReplyDelete
  21. I tried throwing money at the screen but nothing happened... what I need to do to get one of these???

    ReplyDelete
  22. excelente que bueno que arta gente comparta la pasión por el dead space

    ReplyDelete
  23. That is so pro. Excellent work! That would be an awesome Halloween costume. If there was only a Samus Aran costume with that level of detail... One can only dream.

    ReplyDelete
  24. the most epicnessnes thing iv ever seen

    ReplyDelete
  25. Plasma Cutter? with working LED Recticles. I think so. Good work!

    ReplyDelete
  26. Seriously cool. Very nice first build, many people don't achieve that level without a lot of practice. Bravo!

    ReplyDelete
  27. Amazing work my friend, work in special effects and this really impressed me. If I can find the time and $ I plan on making a necromorph, though I think your friend Matt makes a good one lol

    ReplyDelete
  28. Fucking Amazing!! :D i like this!

    ReplyDelete
  29. How much would it cost you to make the advanced suit, to sell to me?

    ReplyDelete
  30. this is pure awesomeness! really impressed by your work

    ReplyDelete
  31. Oh! Kudos sir, that's amazing.

    ReplyDelete
  32. Dude you have a sweet setup! Nice work on the suit... Awesome.

    ReplyDelete
  33. This is just awesome !

    ReplyDelete
  34. Groovy Man! Must help to live in a crafting studio. Where can I rent one of those?

    ReplyDelete
  35. You are the Man, congrats.

    ReplyDelete
  36. WOW!!!! Dude That IS FREAKIN' AWESOME!!!!

    ReplyDelete
  37. Nice....cool pics man

    ReplyDelete
  38. Oh my god. This is just mind-blowing.

    ReplyDelete
  39. its sooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo........................................................................................................................................................................................................aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaawwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwsssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssoooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooommmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaasssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssstttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttttiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiicccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    ReplyDelete
  40. Holycrap, you are my costuming hero. D: I wish I could make things this amazing!

    ReplyDelete
  41. If I saw someone in that costume in a corridor with a Plasma Cutter I would bow down and worship the great Isaac Clarke :) Fucking great job dude! You rock.

    ReplyDelete
  42. Another awesome costume! I don't know how you have the time! Great Job as always! 130MB ;)

    ReplyDelete
  43. Promote this as a halloween costume man it would be a great idea! DO IT!

    ReplyDelete
  44. Promoting this is a great idea i'm sure that alot of people would love to be a badass for a day. Man great work on it to. i say its dead on accurate. :D

    ReplyDelete
  45. Guys that's really awesome. You should build a statue too. Respect.

    ReplyDelete
  46. NECROMORPHS BEWARE OF MY CORDLESS DRILL BWAHAHAHAHA

    ReplyDelete
  47. hey hey hey!!! can you help? im going to make an isaac costume as well and i need some pointers

    ReplyDelete
  48. How much my friend??? Im very interested!!!! Im from tapachula chiapas mexico... You are the best...... Congratulations!!!
    This is my mail. Asgard_josel@hotmail.com

    ReplyDelete
  49. That's so AWESOME!

    ReplyDelete
  50. I WILL GIVE YOU THIS MANY MONEYS!!!!!!!

    ReplyDelete
  51. I'm throwing my money at the screen, why is nothing happening?!

    ReplyDelete
  52. crazy guys!!!!:))))) nice job!!!

    ReplyDelete
  53. huh?how?wha? freakin awsome dude

    ReplyDelete
  54. lol, you are such a freak just like myself. I am working on dead space suite lately too. but in a different way.
    http://louiezzz.deviantart.com/#/d4s65qr

    ReplyDelete
  55. Dude you are great im thinking of following your steps and making one dead space costume for this halloween, but i will just exchange the metal and steel or whatever u used with some cardboard and then paper mache it (i hope it survives the weather LOL
    )

    ReplyDelete
  56. Sooo... how much are you charging? ;)

    ReplyDelete
  57. Dude... I love you. This is the most impressive Isaac Clarke I have EVER seen. I would want to buy it from you, but I'm guessing that you wouldn't be interested in selling it. Oh well, hope you have fun with it.

    ReplyDelete
  58. im trying to make the advanced suit from DS2 but, im having trouble finding good pics to base it off of

    ReplyDelete
  59. Amazing job mate! Even when you claim that the last photo is a bit cheesy, actually that backlight looks like an explotion if you look at it quickly and adds a good effect. I mean, the angle of the camera, the messy shop, dark environment and the light in the back almost makes it look like a shot from the game.

    ReplyDelete
  60. http://www.thinkgeek.com/product/e9dd/?srp=1 if you can afford this.... well, it's a little better than a drill. and you could use a cardbox with a picture of a necromorph....


    awesome.... what's your RIG number?

    ReplyDelete
  61. Stop here is my paycheck take my soical security take anyting!!!! Oh and quit your job and d this for a living!!!!

    ReplyDelete
  62. Here's all my money and the little bit of my soul that hasn't died yet.

    ReplyDelete
  63. How much did that cost, how long would it take to make a copy? Please email me with info, my email is: Armorines@live.com
    If you have the time. The reason why I'm askin is if so that you could make the riot security version, could the clear plastic visor be replace with eye protection plastic? And I would like to thank you for the time if you do email me, if not, oh well, it looks wicked and I can't find any Dead Space outfits that aren't the cheesy clothing type anywhere.

    ReplyDelete
    Replies
    1. I've posted it before, but if there's something you'd like me to make for you, please feel free to send me an email at sthorsson99@yahoo.com so we can discuss it.

      Delete
  64. i wish you can make me one, how mcuh?

    ReplyDelete
  65. I need a Celebrity Suits as it is my wedding in next month.

    ReplyDelete
  66. You should do the Level 3 Engineer R.I.G. (my personal favorite) from DS1

    ReplyDelete